Auto Guide  ››  Commercial Vehicles  ››  Tractors  ››  HMT Tractors  ››  7511

Technical Specification of 7511

Specifications
Make 4R 1040 KOEL
Type Diesel 4 Stroke, Direct injection, Water Cooled
No. OF Cylinders 4
H.P. Range 75 H.P. Category
Bore/Stroke 105 mm / 120 mm
Displacement Volume 4160 CC
Compression Ratio 17:01
Rated RPM 2200 RPM
Air Cleaner Two stage filtration, oil bath with pre-cleaner
Cooling System Forced water circulation type, with thermostatic control
Clutch Dual, Dry friction plates, 1st for tractor travel, 2nd for P.T.O. shaft drive independently
No. of Speeds 8 forward + 2 reverse
Forward (With rear tyres size (18.4 / 15-30)
STEERING Hydrostatic Power Steering
Foot Brake Hydraulic, Internal expanding shoe type, with a system of individual wheel braking
Parking Brake Hand-operated, Mechanical, Contracting band type
P.T.O. Shaft Operation Independent Standard rpm 540 at 2000 engine rpm. Ground P.T.O. rpm 305.9 to 1331.6 available through gearbox.
Fuel Tank 80.0 litres
Engine Sump 11.5 litres
Air Cleaner 1.75 litre
Gear Box 25 litres
Hydraulic Steering 2.5 litres
Portals (Each) 1.9 litres
F.I. Pump 0.3 litre
Tyre Front 6.50-20
Tyre Rear 18.4 / 15-30
Length 3950 mm
Width 1960 mm
Wheel base 2350 mm
Overall height upto Steering wheel 2670 mm
Height of Drawbar 535 mm
Ground clearance 480mm
Min. turning radius 3600 mm + 200mm (with braking one wheel)
With Std. ballast 3300 kg
With full ballast 4104kg

Back


Commercial Vehicles in India

Commercial Vehicles by Company
All About Commercial Vehicles
Bike and Car EMI Calculator
 Loan Amount (Rs.):
 Interest rates (P.A.) %:
 Loan Period in Years :
 Resulted (EMI) is :

Copyright © 1996-2012 IndiaMART InterMESH Ltd. All rights reserved.

Terms of Use  |  Privacy Policy  |  Contact Us  |  Feedback / Complaints  |  Help