Auto Guide  ››  Commercial Vehicles  ››  Tractors  ››  HMT Tractors  ››  HMT Yuva

Technical Specification of HMT Yuva

Specifications
Horsepower Category 25 H.P.
Type 4 Stroke, Direct Injection, Water Cooled
No. OF Cylinders 2
Bore/Stroke 95mm/110mm
Displacement Volume 1560 CC
Compression Ratio 17.4:1
Rated RPM 2100 RPM
Air Cleaner Three stage filtration, oil bath and paper filter with cyclone type pre-cleaner
Cooling System Forced water circulation type with thermostatic control
Clutch Single dry disc Plate
Foot Brake Mechanical Disk, dual pedal operable individually or simultaneously with wheel braking system
Parking Brake Integral with Pedal and Latch-Lock system
P.T.O. Shaft Standard 545 r.p.m. (6 spline) and gear operated 5 additional r.p.m. speeds from 298 r.p.m. to 1265 r.p.m.
P.T.O. Shaft Operation Six spline, 545 rpm standard speed from 298 to 1265 r.p.m. through gearbox at rated engine speed
Fuel Tank 65 litres
Engine Sump 5.0 litres
Air Cleaner 0.6 liter
Gearbox trasmission (Full) 35.0 litres
Steering 1.6 litres
Cooling System 7.5 litres
F.I. Pump 0.2 litre
Front 6.00-16 (6PR)
Rear 12.4/11-28, (10 or 12 PR)
Length 3314 mm
Width 1690 mm
Overall height 1635 mm
Ground clearance 325 mm
Min. turning radius 2700 mm+
(with braking one wheel) 100 mm
Weight of tractor without accessories and ballasting 1650 kg
Wt of tractor with full ballast 1970 kg

Back


Commercial Vehicles in India

Commercial Vehicles by Company
All About Commercial Vehicles
Bike and Car EMI Calculator
 Loan Amount (Rs.):
 Interest rates (P.A.) %:
 Loan Period in Years :
 Resulted (EMI) is :

Copyright © 1996-2012 IndiaMART InterMESH Ltd. All rights reserved.

Terms of Use  |  Privacy Policy  |  Contact Us  |  Feedback / Complaints  |  Help