Cars in India | Bikes in India | Popular Cars | Scooters | Commercial | Auto News | Auto Expo

Commercial Vehicles  ››  Tractors  ››  Sonalika Tractors  ›› Sonalika Tractors

Sonalika Tractors

Sonalika group manufactures the best quality of tractors that caters to the agricultural as well as commercial sector of the country in the most effective way.

Sonalika Tractors
They produce the most well techniqued and fuel efficient tractors with the inexhaustible range to choose from. All of its models and variants are listed below:



DI-90 4WD

Framed with all standard features, this variant of Sonalika International tractor has 4105 DC TLW07DHT engine with four cylinders fitted inside. It has an self energizing water sealed disc brakes along with the parking brake for additional safety. It is also techniqued with power steering whereas the weight of the tractor with ballast is 3640 kgs.

View Technical Specification of DI-90 4WD


DI 75 2WD

This two wheel drive Sonalika International tractor belongs to 75 H.P category. It has a very high torque back up with excellent lugging power. The dimensions for its front and rear tyres are 7.50 x 16 and 16.9 x 30 respectively. The height of exhaust pipe is 2375 mm whereas the minimum ground clearance with ballast is 410 mm.

View Technical Specification of DI 75 2WD


DI 75 4WD

It has a direct injection water cooled diesel engine of 4100 FLT model with displacement volume of 3708 cc. The dimensions for its front and rear tyres are 9.50 x 24 and 16.9 x 30 respectively. The overall height for exhaust pipe is 2350 mm while the minimum ground clearance with ballast is 375 mm.

View Technical Specification of DI 75 4WD


DI 60 2WD

It has a very low lubricant oil consumption with a highly efficient 4100 FL model engine. It belongs to the 60 H.P category with four cylinders inside. The dimensions for its front and rear tyres are 6.50 x 20 and 16.9 x 28 mm respectively. The total weight of the tractor with ballast is 3250 kgs and without ballast is 2320 kgs.

View Technical Specification of DI 60 2WD


DI 60 4WD

It consists of Inline Plunger Type fuel injection system with fuel injection pressure of 250 KG/CM2. The dimensions for its front and rear tyres are 9.50x24 and 16.9x30 respectively. The total weight of the tractor goes up to 3714 kgs with ballast whereas the weight is 2656 without ballast.

View Technical Specification of DI 60 4WD


DI 60 Senior

It has a 4 stroke, direct injection, ohv diesel engine belonging to 60SAE category. The bore and stroke is 100/110 mm whereas the compression ratio is 17.4:1. It has a displacement volume of 3456 cc with the rated engine speed of 2100 rpm. The tractor weighs up to 2350 kgs.

View Technical Specification of DI 60 Senior


DI 35

This is a two wheel drive tractor with two cylinders fitted inside. It has a model of 3095 FL belonging to 35 H.P category. The dimensions for the front and rear tyres are 6.00 x 16 and 12.4 x 28, 13.6 x 18 respectively. The height of its steering wheel is 1750 mm while the minimum ground clearance with ballast is 410 mm.

View Technical Specification of DI 35


DI 730 II

It has a model of 2102 F with 30 H.P category. The bore and stroke of this tractor is 102/110 mm whereas the displacement volume is 1798 cc. The maximum weight with ballast is 2435 kgs while the maximum weight without ballast is 1835 kgs. It has a minimum ground clearance of 410 mm with the compression ratio of 18.5:1.

View Technical Specification of DI 730 II


DI 730 III

It has a model of 3092 F with three cylinders fitted inside. The displacement volume is 2194 cc while the bore and stroke is of 92/110 mm. The maximum weight of the tractor is 2100 kgs with the minimum ground clearance of 375 mm.

View Technical Specification of DI 730 III


DI 750

Belonging to 50 H.P range, this tractor is of S- 325 model. The bore and stroke is 91.4/127 mm whereas the displacement volume is 2500 cc. It has a compression ratio of 18.5:1 with the rated engine speed of 2250 rev/min. The total weight of the tractor goes up to 1950 kgs.

View Technical Specification of DI 750


DI 750 II

This two wheel drive tractor is of 3102 FL model with three cylinders fitted inside. It has a displacement volume of 2894 cc with the bore and stroke of 100/118 mm. The compression ratio is 18.4:1 while the rated engine speed of 2100 rpm. The maximum weight of the tractor with ballast is 2550 kgs and the maximum weight of the tractor without ballast is 2200 kgs.

View Technical Specification of DI 750 II


DI 750 III

It has a model of 4095 FL with the rated engine speed of 2200 rpm. The displacement volume is 3120 cc whereas the bore and stroke of 95/110 mm. The maximum torque is 180 NM with the wheel base of 2068 mm. The maximum weight of the tractor with ballast is 2940 kgs while the weight without ballast is 2240 kgs.

View Technical Specification of DI 750 III


DI 740

It belongs to the H.P category of 36 BHP as per BSAU 141(40 SAE). The compression ratio is 17.5:1 with the rated engine speed of 2000 rpm. It has a displacement volume of 2592 cc whereas the bore and stroke is 88.9/127 mm. Along with all these, it has 8 forward, 2 reverse speeds with high and low selector levers type of transmission. The tractor weighs up to 1910 kgs.

View Technical Specification of DI 740


DI 740 III

It is a two wheel drive engine belonging to 40 H.P category. The maximum torque is 148 NM whereas the displacement volume is 2440 cc. It has a bore and stroke of 97/110 mm with the wheel base of 1930 mm. The maximum weight of the tractor with ballast is 2550 kgs while the maximum weight without ballast is 2000 kgs.

View Technical Specification of DI 740 III


DI 745 III

This is a 3100 F model with 45 H.P category. The bore and stroke is of 100/110 mm while the displacement volume is 2593 cc. It has a maximum torque of 172 NM with the wheel base of 1968 mm.

View Technical Specification of DI 745 III


DI 732 III

It is a 3095 F model belonging to the range of 34 H.P category. It has a compression ratio of 17:1 with the displacement volume of 2339 cc. The bore and stroke is 95/110 mm with the wheel base of 2000mm. The tractor weighs up to 2100 kgs.

View Technical Specification of DI 732 III


DI 55

This is a 4100 F model belonging to 60 H.P category. The bore and stroke is 100/110 mm while the displacement volume is 3456 cc. It has a fuel tank capacity of 53 liters whereas the capacity of gear box and hydraulics is 55 liters. The total weight of the tractor comes up to 2200 kgs.

View Technical Specification of DI 55


DI 735

It is 3097 F model belonging to 38 H.P range of category. The tractor weighs up to 2100 kgs with the minimum ground clearance of 385 mm. It has a displacement volume of 2438 cc whereas the rated engine speed is 2000 rpm. It has a minimum ground clearance of 385 mm.

View Technical Specification of DI 735


DI 340 S

Based on 4105 DCTLW07DDHT model is a two wheel drive tractor belonging to 90 H.P category. The bore and stroke is 105/118 while the displacement volume is 4087 cc. Its rated engine speed is 2200 RPM +25. its total weight comes up to 2705 kgs whereas the dimensions for its front and rear tyres are 9x16 and 18.4x30 respectively.

View Technical Specification of DI 340 S
All About Commercial Vehicles


Indiamart

Terms of Use - Privacy Policy - Link to Us

Copyright © 1996-2014 IndiaMART InterMESH Ltd. All rights reserved.