Commercial Vehicles  ››  Tractors  ››  Sonalika Tractors  ››  DI 732 III

Technical Specification of DI 732 III

Specifications
TYPE 4 Stroke, Direct Injection, Water Cooled
NO. OF CYLINDER 3
BORE & STROKE(MM) 95/110 MM
DISPLACEMENT (CC) 2339CC
COMPRESSION RATIO 17:01
RATED ENGINE RPM 2100 RPM
AIR CLEANER Oil Bath With Pre-cleaner And Glass Dust Collector With Centrifugal Vanes
COOLING SYSTEM Forced Water Circulation
FUEL INJECTION PUMP Mico Bosch Make Inline Plunger Type Pump With Centrifugal Variable Speed Mechanical Governor
CLUTCH Specification
TYPE Single Dry, Disc Type
TRANSMISSION 8 Forward, 2 Reverse Speeds With High And Low Selector Levers.
TYPE 21 Spline Involutes
RPM 1000 RPM Standard
BRAKES Heavy Duty Self Energising, Water Sealed Disc Brakes With Parking Latch For Additional Safety
HYDRAULIC 2 Lever, Automatic Position And Draft With Mix Control
A. POSITION CONTROL To Hold Lower Links At Desired Heights
B. AUTOMATIC DRAFT CONTROL To Maintain Uniform Draft
C. MIX CONTROL For Simultaneous Use Of Position And Draft Controls
HYDRAULIC PUMP Positive Displacement, Gear type
LINKAGE 3 Point Linkage Category - I Suitable For Category - II Type Pins.
LIFTING CAPACITY 1200Kg At Ends Of Lower Links
ELECTRICALS INSTRUMENTS 12 Volt 75 AH, Battery 12V, 1.9KW Starter Motor And 12V, 33A Alternator.
TYRES Pneumatic
FRONT TYRE Ribbed 6.00x16 8, Ply Rating
REAR TYRE Traction 12.4-28, 12 Ply rating
WHEEL BASE 2000 MM
OVERALL LENGTH 3580 MM
OVERALL WIDTH 1720 MM
OVERALL HEIGHT 2200 MM
MIN. GROUND CLEARANCE 375 MM
WEIGHT OF TRACTORS 2100 Kg
Commercial Vehicles in India

Commercial Vehicles by Company
All About Commercial Vehicles
Bike and Car EMI Calculator
 Loan Amount (Rs.):
 Interest rates (P.A.) %:
 Loan Period in Years :
 Resulted (EMI) is :

Copyright © 1996-2012 IndiaMART InterMESH Ltd. All rights reserved.

Terms of Use  |  Privacy Policy  |  Contact Us  |  Feedback / Complaints  |  Help