Cleaning the Two Wheeler

A few tips that will help keep your vehicle clean:

• Before you clean the vehicle, ensure that the ignition switch unit, H.T. Coil and silencer are covered using plastic sheets.
  
• Clean the vehicle using low-pressure water.
  
• All painted surfaces should be washed only with water, as kerosene or detergent will damage the paint
  
• Take care not to apply water on the electrical parts
  
• For cleaning the engine externally, brush it with kerosene and wipe it dry with a clean rag.
  
• Dry the vehicle and lubricate it after you wash it

At times, water may enter on the brake liners during washing, leading to brake slippage. Therefore, make it a point to dry the liners by braking frequently till the brake starts working effectively.

After you’ve cleaned the vehicle:

• Replace or top up engine/ Gear box oil
  
• Clean the air filter
  
• Clean the spark plug, and seal the electrode gap
  
• Overhaul the carburetor
  
• Adjust the control cable
  
• Tighten nuts, bolts and fasteners
  
• Clean and adjust front and rear brakes
  
• Check and adjust steering column play
  
• Check for proper functioning of lights, switches and horn
  
• Check battery electrolyte level and top up with distilled water
  
• Check and adjust drive chain tension
  
• Check and adjust spoke tightness / rim runout
  
• Check and clean inline fuel filter